TV/STB remote control for normal flat crt color tv
nice ABS + silicone
Max transmit angle
The learning function on the general set-top box remote control is mainly to learn the on/off function of the TV set. Once the TV is modulated, it only needs to be turned on and off. Other functions generally do not need to be moved. The use of a set-top box remote control can replace the TV remote control, reducing the operation of a remote control, which is simple and not messy. But be sure to set the initial interface adjustment of the TV to the HDMI1 connected to the set-top box.
The two remote controls must be kept stable during the learning operation and must not be shaken.
When learning, the emitters of the two remote controllers should be on the same line, and the distance should be within 3cm;
If you do not select the button within 14 seconds after entering the learning function, it will automatically exit the learning state. If you do not learn within 14 seconds after selecting the button, the learning state will be automatically exited.
You can exit the learning function by pressing the SET button while learning the key selection status and waiting for a signal reception.