The Simple Rf Universal Remote for Home Theater System is absolutely essential for your LED display. The remote is equipped with different buttons and controls that allow you to adjust the settings of the Led / Lcd. The remote control is compact and lightweight and easy to manage. It has an ergonomic handle that gives you precise grip.
Simple rf universal remote for home theater system
at about 15m long distance
new abs mould
|8. Signal transmission|
IR remote control
1. If the cursor sometimes floats (or drags), press and hold the Back and Home buttons simultaneously for 3 seconds to resynchronize the controller. The indicator will start flashing quickly. When the remote is synced to the USB receiver, set the remote to go down and keep the remote completely still. When the light is on, the remote has been resynchronized.
2. If the remote control does not work and the blue light starts to flash when the USB receiver is properly inserted, you can solve this problem by re-pairing the device. Keep the distance between the remote control and the computer within 1 meter. Press and hold the “Vol Down” and “Mouse Switch” buttons for 2 seconds. When the blue indicator light starts to flash rapidly, place the remote control on a flat surface. When the blue indicator stops flashing and turns on, pairing is complete.