The first method
From the code table to identify representatives of corresponding three-digit code to remote control TV set. Press and hold the "set" button down (about few seconds) until the led is lit, release the "set" key. Enter a three-digit code for detected every single-digit, led Flash, digital input, and indicator, is set. Note: the found more than one set of code, to use the first set of code, if TV brand code table, try first or third way. Case blinks two times or more times in a row, then enter code error, need to re-enter the three-digit code.
The second method
Open TV, remote control at the TV and press and hold the "set" button down (about few seconds), until the led is lit after release. Then each time you press the "volume +" button or the "volume-" button, the remote will launch a code, and indicator light blinks once, repeat this operation until TV appears on the "volume" symbol, and then click the "settings" button to complete, at which point indicator. Check the key function is normal, and is not reset until you find the correct code. Note: the "volume +" key forward search, the "volume-" button is a backward search, the search can be switched with each other, such as "volume +" in the search, I get a "volume" symbol was not stopped in time, the "volume-" back in time.
The third method
Open TV, remote control at the TV and press and hold the "set" button down (about few seconds) until the indicator lights up and release. Press "power" button, the led blinking into the automated search, when television appeared "quiet" symbol, press twice the "set" button, the indicator, search for code completion. Check the key function is normal, if not normal, then reset until you find the correct code.